2-in-1 Jump Starter and Air Compressor
Nine models on one platform: a 6000mAh pack with 500A starting current and 1000A peak, and a 19mm-cylinder pump rated 5-150 PSI. What changes across DY15 to DY23 is the housing and the control layout, so a buyer can pick a shell for the shelf and keep one electrical specification.
Models in this range: 9
DY15 Jump Starter and Air Compressor 6000mAh 1000A Peak
Base model of the DY15-DY23 platform: plain black shell with a centred screen and a four-key panel.
DY16 Jump Starter and Air Compressor with Ribbed Grip Body
Moulded side ribs and a recessed key row for gloved handling.
DY17 Jump Starter and Air Compressor with Orange Power Key
The master power key is a large orange button in the centre of the panel.
DY18 Jump Starter and Air Compressor with Wide LCD Panel
Widest display in the platform: pressure, battery and mode shown side by side on one LCD.
DY19 Jump Starter and Air Compressor in Red Housing
Red overmould, same platform, chosen for visibility against dark trim.
DY20 Jump Starter and Air Compressor with Twin-Screen Layout
Two readouts: battery percentage above, pressure below, both visible while inflating.
DY21 Jump Starter and Air Compressor with Orange Outline Trim
Orange trim lines on the bezel and control pad, aimed at shelf visibility.
DY22 Jump Starter and Air Compressor in Grey and Black
Grey face panel over a black body, with the brand plate left blank for OEM printing.
DY23 Jump Starter and Air Compressor in Orange Housing
Orange overmould, the most visible option in the range.
What we check before the balance is paid
- Jump-start and pump tested on the same pack
- Pump cut-off compared with a calibrated gauge
- Clamp reverse-polarity and short-circuit check
- Drop test on the housing corners
Request a quote
Send the model numbers, quantity and destination port. We reply with price, MOQ, lead time and packing details.
Send your requirementBuying questions
How do I choose between the nine models?
All nine share the 6000mAh pack, 500A starting, 1000A peak and 150 PSI pump. Choose on the housing: DY15 plain, DY16 ribbed grip, DY17 large orange key, DY18 wide LCD, DY19 red, DY20 twin screens, DY21 orange outline, DY22 grey OEM plate, DY23 orange.
What is the MOQ for a 2-in-1 unit?
100-500 pieces for stock builds, 20 units per carton. A new housing tool or a custom display raises the minimum; we confirm it in writing with the quote.
Can the pump and jump start run at the same time?
No, and they should not: both draw from the same pack. The controller blocks the pump while the clamps are energised, which we verify on every batch.
Which certificates apply?
UN38.3 for the lithium pack in transport, plus CE or FCC by destination market. Certificates are checked against the production batch before the balance is released.
Other ranges
Buying 2-in-1 jump starter and air compressor combos
Nine models that combine the 6000mAh / 1000A starting pack with a 19mm air compressor, so one unit covers a flat battery and a soft tyre.
Where this range wins
Roadside and fleet buyers prefer one device over two. The trade-off is a shorter inflation duty cycle than a dedicated pump.
Housing variants
DY15 to DY23 share the platform and differ in shell, screen layout and colour, so a distributor can cover several price points from one order.
What we inspect
Starting current under load, cut-off pressure, duty cycle temperature, hose thread fit and the clamps.
Documents
UN38.3 and MSDS for the battery, CE or FCC depending on market, plus the carton marks your forwarder asks for.
Specification range
| Battery | 6000mAh, 1000A peak, 500A starting |
|---|---|
| Compressor | 19mm cylinder, 0.35-10.5 bar / 5-150 PSI |
| Unit size | 150 x 75 x 50mm, 515g net |
| In the box | Jump clamps, screw-on hose, nozzle set, USB-C cable |
| Carton | 20 units per carton |
Quick facts: 2-in-1 Jump Starter and Air Compressor
One-line answer: 2-in-1 Combos — 9 export models, with voltage, plug type and packaging specified per market. Supplied from Ningbo with OEM/ODM and pre-shipment inspection.
Key points
- Models: DY15, DY16, DY17, DY18, DY19, DY20, DY21, DY22 and 1 more
- 9 models; voltage, plug type and packaging can be specified per market.
- MOQ is typically 100-500 pieces and higher for OEM orders; it is confirmed in writing with the quote.
- Production runs 15-30 days for regular items and 30-45 days for complex or large orders, counted from sample approval and deposit.
- OEM/ODM is available: housing, printing, gift box, manual and voltage/plug type can be tailored to the destination market.
- Quotes are FOB Ningbo by default, CIF on request. Ningbo port sails direct to Europe, the Americas, Southeast Asia, the Middle East and Africa.
Buying questions
Can models be mixed in one container?
Yes. Different models and ranges can be consolidated in one container; loading quantity is calculated from carton dimensions and weight.
How do samples work?
Samples are available for standard models; the sample fee is credited against the bulk order and freight is collect.
What is the lead time?
Production runs 15-30 days for regular items and 30-45 days for complex or large orders, counted from sample approval and deposit.
Need a quote, a sample or a spec sheet?
[email protected] · +86 181 5404 8176 (WhatsApp)
Request a quote